[Freifunk-Bonn] TP-Link WR 841 als Switch für Heimnetzwerk verwenden

[Thorsten]

Am 2022-09-04 20:58, schrieb edgar.soldin at web.de:
> theoretisch isset simpel. lan interface aus dem freifunk client raus
> und dafür mit wan brücken. an sich könntest Du das auch ohne
> Anleitung.
> 
> poste doch mal bitte die komplette `/etc/config/network` im original.
> vlt. kann ich da adhoc was diktieren.

Bitte sehr.

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fd1f:ed18:886c::/48'

config interface 'wan6'
	option proto 'dhcpv6'
	option ifname 'br-wan'
	option ip6table '1'
	option sourcefilter '0'
	option peerdns '0'
	option reqprefix 'no'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option ports '1 2 3 4 0t'

config interface 'wan'
	option igmp_snooping '1'
	option multicast_querier '0'
	option peerdns '0'
	option auto '1'
	option type 'bridge'
	option proto 'dhcp'
	list ifname 'eth0'
	list ifname 'eth1'

config rule6 'wan6_lookup'
	option mark '0x01/0x01'
	option lookup '1'

config route6 'wan6_unreachable'
	option type 'unreachable'
	option table '1'
	option target '::/0'
	option metric '65535'
	option gateway '::'
	option interface 'loopback'

config interface 'mesh_wan'
	option vxlan '1'
	option ifname 'br-wan'
	option index '0'
	option proto 'gluon_wired'
	option disabled '1'
	option transitive '1'

config interface 'mesh_lan'
	option igmp_snooping '0'
	option ifname 'eth0.1'
	option index '4'
	option vxlan '1'
	option proto 'gluon_wired'
	option disabled '1'
	option transitive '1'
	option macaddr '96:a7:e1:bc:85:74'

config interface 'mesh_vpn'
	option ifname 'mesh-vpn'
	option transitive '1'
	option mtu '1398'
	option macaddr '96:a7:e1:bc:85:77'
	option fixed_mtu '1'
	option proto 'gluon_mesh'

config interface 'mesh_radio0'
	option proto 'gluon_mesh'

config interface 'client'
	option igmp_snooping '1'
	option type 'bridge'
	option auto '1'
	option ra_holdoff '30'
	option multicast_querier '1'
	option macaddr '30:b5:c2:ab:f2:2a'
	option ipv6 '1'
	option keep_ra_dnslifetime '1'
	option sourcefilter '0'
	option peerdns '1'
	option robustness '9'
	option reqprefix 'no'
	option query_interval '2000'
	option query_response_interval '500'
	option proto 'dhcpv6'
	list ifname 'local-port'
	list ifname 'bat0'

config device 'local_node_dev'
	option type 'veth'
	option name 'local-node'
	option peer_name 'local-port'
	option macaddr '16:42:ca:fe:be:ef'
	option peer_macaddr '30:b5:c2:ab:f2:2a'

config interface 'local_node'
	option ifname 'local-node'
	option ip6addr 'fdff::ff/128'
	option ip6deprecated '1'
	option proto 'static'

config interface 'gluon_bat0'
	option gw_mode 'client'
	option proto 'gluon_bat0'

config interface 'bat0'
	option multicast_router '2'
	option ifname 'bat0'
	option auto '1'
	option macaddr '30:b5:c2:ab:f2:2a'
	option learning '1'
	option proto 'none'

config route6 'local_node_route6'
	option target 'fdfe::/64'
	option gateway '::'
	option interface 'client'

-- 
Gruß aus Lindlar
Thorsten